Custom Parcel Sorting Systems. Engineered for Real Operations.

Wheel-based sorting line for cartons and parcels

Modular swivel wheel diversion integrated inline with warehouse conveying for lighter cartons and parcels.
Sorting Technology / Modular Diversion

Swivel Wheel Sorter Solutions

A swivel wheel sorter diverts cartons and parcels from a conveyor line using powered wheels that rotate to guide items into the chosen lane. TrueLiSort swivel wheel sorter solutions provide modular diversion for lighter cartons and parcels in operations that need flexible conveyor integration. It is the most compact and cost-effective of the three main sorter families, with a limited weight and size envelope.

Compact Footprint
Conveyor Integration
Cost-Effective CapEx
Request a Layout Design
All Sorting Solutions

Best-Fit Operations

Swivel wheel sorters suit logistics centers and warehouse distribution where items are robust enough for wheel-based diversion and the process already relies on conveyors. They are a practical choice when a full cross-belt system would be more than the operation needs, offering gentle handling in a compact footprint.

Envelope Limit Check: Heavier or larger items will not divert correctly. Those operations should compare the cross belt sorter or narrow belt sorter.

Choose by Mechanism and Limits

Each sorter family diverts items by a different mechanism, and the mechanism sets its limits. The envelope rows are physical limits, not preferences — compare on the same peak-hour rate and the same item mix.

This Solution
Swivel Wheel
Rotating wheels push items sideways. Compactness & low cost, strictly for lighter, smaller items.
Mid-Range Option
Angled belts steer items off the carrier, balancing throughput, parcel mix and cost.
Max Throughput
Crosses items between two belts at discharge for highest rate and widest range, largest footprint.

How It Works

Items travel on a conveyor and are identified upstream. At each diversion point, the wheels swivel to steer the item into the assigned lane, while controls and WCS coordinate routing and exception handling. Lane count, item orientation and spacing are confirmed during engineering review. The line is built from our conveyor systems and integrated with identification and control layers, including a defined data-acceptance checklist.

STEP 01 → CONVEY
Cartons travel on infeed conveyors with confirmed spacing and orientation.
STEP 02 → IDENTIFY
Upstream barcode scanning & identification pass a data-acceptance check.
STEP 03 → SWIVEL
Powered wheels rotate to steer the item cleanly into its assigned lane.
STEP 04 → ROUTE & HOLD
Controls and WCS manage lane assignment and exception hold routes.

Narrow-belt conveyor section reviewed during a sorting layout survey

Conveyor section evaluated during layout survey for access platforms, guarding, spacing and diversion lane density.
Survey • Access • Guarding

Layout, Access and Exceptions

We plan access platforms, guarding and maintenance clearance into the layout from the start; a line that cannot be serviced safely will lose availability over time. Normal and exception routes are documented separately, with hold conditions and escalation contacts for no-reads, mis-sorts and alarms. Chute or lane density is reviewed against the destination count and the physical limits of the line.

Item Envelope and Gentle Handling

Swivel wheel sorters offer very good gentle handling in a compact, low-cost footprint, but only for lighter, smaller items. The envelope is a physical limit: heavier or larger items will not divert correctly. If your mix includes those items, compare a narrow belt or cross belt family rather than forcing the wheel sorter beyond its range.

Typical Inline Diversion Applications

  • Shipping Dock Spurs: Diverting sealed cartons to regional carrier dock doors.
  • Zone-to-Zone Routing: Steering totes or cartons into picking and packing zones.
  • Exception & QC Spurs: Separating no-read or overweight items off the main line.
  • Compact E-Commerce Lines: Modular lane sorting where full loop sorters are oversized.

Engineering and Handover

We confirm parcel size and weight limits, lane logic and site constraints during engineering review, manufacture and test equipment in-house, then install, commission and train the operating team. Our concept design process explains how the layout is planned from a survey.

Current Layout
Interface List
Revision Record
Spare Parts
Training Record
Approved Limits

Cost and Expansion

Model energy, spare parts and maintenance over the system’s life. The compact footprint leaves room for expansion, but lane density has limits; review the destination count against the line’s physical capacity and reserve interfaces for growth.

Plan a Swivel Wheel Line

Share your item profile, lane count and conveyor layout. We will confirm whether the item envelope fits and what configuration to use.

Request a layout design →
All Sorting Solutions

Technical Q&A

Frequently Asked Questions

Can a swivel wheel sorter handle cartons and poly bags?

It handles robust cartons and small parcels well; very light bags or oversize items may not divert reliably. Test representative items before committing.

What happens if cartons exceed a swivel wheel sorter’s weight or size limits?

Heavier or oversized items will not divert accurately and can create jams or wear at the wheel bank. If your item profile exceeds the wheel sorter envelope, evaluate a narrow belt or cross belt sorter rather than overextending the wheel diverter.

How does a swivel wheel sorter integrate into an existing conveyor line?

Swivel wheel modules bolt into straight conveyor runs, paired with upstream spacing and orientation conveyors, barcode scanning or DWS identification, and WCS routing logic that triggers wheel rotation at each lane spur.

Are there limits to how many lanes a swivel wheel line can serve?

Yes. Each diversion lane requires minimum spacing for safe wheel actuation, chute takeaway clearance and maintenance access. When destination counts grow very high within limited floor space, a narrow belt or cross belt sorter often delivers higher chute density.

What documentation is included at handover for a swivel wheel sorting line?

Handover includes the as-built layout, interface list, revision history, spare-parts list, role-based training records and approved item-envelope limits so your site team can operate and maintain the system independently.

Compare Other Sorting Families:

Cross Belt Sorter →
Narrow Belt Sorter →
Put Wall System →
Conveyor Systems →